Type 101

Features

- Single seal
- Cartridge design for precise, easy intallation
- Balanced design for wide range of services
- Independent of direction of rotation
- Shrink-fitted seal faces can be easily replaced with other materials.
  (Not suitable for temperatures above 300°C)
- Universal applicable for packings conversions, retrofits or original equipment
- No damage of the shaft by dynamically loaded O-Ring
- Extended service life
- Installation faults are avoided, cost-effective
- No damage caused by dirt entered during assembly
- Customer specific versions available

Operating range

Shaft diameter: d1 = 20 ... 100 mm (1.000" ... 4.000")
Other sizes on request
Temperature: t = –40 °C ... +220 °C (–40 °F ... +428 °F)
(Check O-Ring resistance)

​

Sliding face material combination Carbon Resin VS SSIC
Pressure: p1 = 25 bar (363 PSI)
Sliding velocity: vg = 16 m/s (52 ft/s)

​

Sliding face material combination SSIC VS SSIC or TC VS SSIC
Pressure: p1 = 12 bar (174 PSI)
Sliding velocity: vg = 10 m/s (33 ft/s)

​

Axial movement: ±1.0 mm, d1 ≥ 75 mm ±1.5 mm

Materials

Rotary Seal Face: SSIC, Carbon graphite resin, Tungsten carbide
Stationary Seal Face: SSIC, Tungsten carbide
Secondary seals: FKM, EPDM, FFKM, FEPM, NBR
Springs: SUS316, Hastelloy® C-4
Metal parts: SUS316
*Other configuration of material also available on request