Type BCD-S
Features
Operating range
- Dual seal
- Cartridge
- Balanced
- Independent of direction of rotation
- Double pressure balanced
- Premium-grade silicon carbide solid seal faces are excellent for high temperature,
high speed pumps and enduring abrasive fluid.
- Universal applicable for packings conversions, retrofits or original equipment
- No damage of the shaft by dynamically loaded O-Ring
- Extended service life
- Installation faults are avoided, cost-effective
- No damage caused by dirt entered during assembly
- Straightforward and easy installation due to pre-assembled unit (reduced down-times)
- Individual adaptation to pump design possible
- Customer specific versions available
Materials
Rotary Seal Face: SSIC
Stationary Seal Face: SSIC, Carbon graphite resin, Tungsten carbide
Secondary seals: FKM, EPDM, FFKM, Perflourocarbon rubber
Springs: SUS316, Hastelloy® C-4
Metal parts: SUS316
Shaft diameter: d1 = 25 ... 100 mm (1.000" ... 4.000")
Other sizes on request
Temperature: t = –40 °C ... +220 °C (–40 °F ... +428 °F)
(Check O-Ring resistance)
​
Sliding face material combination CB VS SSIC
Pressure: p1 = 25 bar (363 PSI)
Sliding velocity: vg = 16 m/s (52 ft/s)
​
Sliding face material combination SSIC VS SSIC or TC VS SSIC
Pressure: p1 = 20 bar (290 PSI)
Sliding velocity: vg = 10 m/s (33 ft/s)
​
Barrier fluid circulation system:
P3max = 25 bar (290 PSI)
P3max = 7 bar (102 PSI) for poor barrier media
​
Recommended supply medium: Max. ISO VG 5
Axial movement: ±1.0 mm, d1 ≥ 75 mm ±1.5 mm
Item Item Description
1, 3, 6, 7, 11, 14, 15, 19 O-Ring
2 Sleeve
4 Rotary Seal Face In
5 Stationary Seal Face In
8 Stationary Housing Out
9 Stationary Seal Face Out
10 Rotary Seal Face Out
12 Rotary Housing Out
13, 14 Spring
15 Gasket
16 Gland
17 Gasket for Plug
18 Screw Plug
20 Set-Ring
21 Lock Washer
22 Set Screw
23 Screw
24 Setter
